A Move-In Condition Record for New York Tenants

Create a move-in condition record before furniture hides the floors and walls: name each room, describe existing defects precisely, and connect every description to a dated photo. Ask the landlord to inspect with you and keep a copy of the resulting written agreement. A folder of photographs is more useful when someone can tell which apartment, room, and surface each image shows.

This New York guide was checked November 5, 2026. It provides a practical record, not legal advice or a guarantee about evidence. Start with our Security Deposits page; readers outside New York should check their local rules.

Request the joint inspection before occupancy

GOL § 7-107(4) for stabilized units and § 7-108(1-a)(c) for other covered units require an offered inspection after initial lease signing and before occupancy. A requested inspection leads to a written condition agreement. Defects recorded in that agreement cannot be the basis for retaining the deposit when the tenant leaves.

Ask in writing how to arrange it, and save the response. Your own checklist is useful preparation, but it is not automatically the joint statutory agreement. If the landlord does not attend or disputes your description, record that accurately. Do not add a signature or acknowledgment that was never given.

Check housing status before assuming these provisions apply. Rent-controlled housing is different from stabilized housing; subsidized housing and special residential programs may involve additional rules or forms. If you have already moved in, document what you observe now and label the actual date rather than presenting a later record as a pre-occupancy inspection.

Describe observations someone else can locate

“Kitchen damaged” does not identify an object or explain its condition. “Lower cabinet door immediately left of sink: finish peeled along bottom edge; photo K03” is easier to match to an image. Separate what you saw from what someone told you. Write “dark mark below window” rather than diagnosing its cause from appearance.

Walk in a consistent direction through each room. Start with an overview, then photograph each noted defect close enough to show detail. Include a wider view connecting the defect to its location. Keep original files and create separately labeled copies if you crop or annotate an image. Avoid filters that change the appearance of a surface.

Room-by-room condition form

Header: Apartment address and unit: ______. Inspection date and time: ______. Occupancy start date: ______. Tenant and other attendees: ______. Landlord or agent name and role: ______. Person preparing record: ______.

Area What to describe Observation and photo IDs
Entry and hall Door surfaces, frame, floor, visible hardware ______
Living room Walls, ceiling, flooring, windows, trim ______
Each bedroom Same surfaces; closet doors, shelves, tracks ______
Kitchen Counters, cabinets, sink, visible appliance condition ______
Bathroom Tile, grout appearance, fixtures, vanity, visible staining ______
Other included space Identify the particular storage area or other space ______

For each defect add: exact location: ______; description: ______; approximate size if measured: ______; first observed date: ______; related repair message: ______. Mark unexamined areas “not inspected,” and explain why. “No defect observed” describes the limits of your observation better than certifying that a whole room has no problems.

Photo index and acknowledgment

Photo index: File ID: ______. Original filename: ______. Date taken: ______. Photographer: ______. Room and location: ______. Related condition-sheet entry: ______. Backup location: ______.

Witness note: Name and contact details: ______. What the person directly observed: ______. Date of note: ______. A witness should describe their own observations rather than agree generally with everything in your file.

Acknowledgment fields: Copy sent to landlord or agent on: ______, by: ______. Response received: ______. Agreed descriptions: ______. Disputed descriptions or attached comments: ______. Tenant signature and date: ______. Landlord or agent signature, role, and date: ______. These fields record actual participation; an unanswered email is not a signed agreement.

Keep repair requests separate and traceable

A deposit record does not arrange a repair. Send a separate message identifying the problem, location, and access contact, then cross-reference it in your condition sheet. Keep follow-up messages and record what changed after work was done. Preserve both the original condition and the later repair record.

For NYC housing quality or safety problems, HPD directs tenants to contact the owner first and use 311 if the landlord is unresponsive. Save the service request number. Do not delay reporting a safety problem while perfecting photographs, or disturb equipment or suspect materials to obtain a better image.

Make the record usable later

Keep one folder containing the condition sheet, original images, inspection messages, agreement, and repair correspondence. Test that your backup opens. The next useful action is to send the dated condition record and request any corrections while memories are fresh.

Find broader context through CalmJustice and Housing Issues. For an unresolved inspection problem, prepare a focused question using our legal-help call guide. If intake is unavailable, use the alternative-resource organizer. Seek prompt legal help for a short deadline.

Sources